The Value of Fall Safety Harness with Lanyard in the Construction Industry
A lot of things can happen to workers in the workplace no matter what industry it belongs to. As you know the Occupational Safety and Health Agency or OSHA have strict requirements that have been implemented to keep workers protected from workplace-related accidents. An example will be the use of a safety harness with lanyard for people who are involved in jobs that required being off ground at least 4 to 5 feet. The use of these sorts of equipment benefits a lot of workers, especially those that do construction work and any job that involves being regularly high in the air. When it comes to these safety lanyards and harnesses, they are effective in preventing serious injury as well as saving lives.
Safety harnesses come in different types. Those that are meant to keep you from being seriously hurt in a fall have three parts. These three parts cover the lanyard, the harness, and the anchor point. With safety harnesses, you can select from four classes, depending on your current safety needs as a worker. Workers who only need a small amount of support can make the most of a basic harness as the first class of harness. The falling risk that these workers go through are not that much. To be safe than sorry, using this safety harness with lanyard is still a must.
When it comes to the second class of safety harness, you will notice that it has a chest device. This device ensures that workers get to secure the complete half of their upper body. Using this harness is every common for those who have jobs that require them to be lowered into an enclosure or building and be removed at a low speed. For the third class of safety harness, you can refer to it as a full body safety harness. For this harness type, you will find straps for both the lower and upper torso. This is often used to help protect workers who are at risk of falling from serious heights 25 feet or higher. For the last kind of safety harness, you should know that it is just like the first kind. Much like the first one, you can expect this harness to come with a belt. Nonetheless, they are what you see in workers who are put in much difficult environments. The use of this type of harness is also very much common for workers whose jobs require them to be lowered into unsafe worksites.
Safety lanyards often go hand in hand with fall safety harnesses. These are ropes that help connect the harness to the anchor point. These lanyards are created with the use of different materials. Each material comes with a certain degree of flexibility and strength. Depending on the requirements of your job, you will need to look into the best type of material for your safety harness with lanyard.